The majority of the turntables are pre-fitted with a tonearm. If you would like to alter that, or have purchased a more specialist deck that’s without an arm, you will require an adequate arm board. Turntable makers should be able to provide an array of arm-board choices, which should be perfect for just about any tonearm available. For a review of various turntable brands, go to www.pickmyturntable.com.
There are a lot of adjustments on the tonearm. Its height must be set so for the arm to be directly proportional to the surface of the record when the cartridge is in the groove.
It is a possibility to tweak performance by changing this to allow the arm bearing to go a little lower or higher. This changes the angle through which the tip of the stylus touches the groove – however, we would begin with its level.
Then there is the tracking weight, that’s adjusted by shifting a counter-weight at the back of the tonearm. The downforce has to be set according to the recommendation of cartridge maker, to begin with at the minimum.
If the tracking weight is set very high the sound becomes ponderous and dull. Too low and the presentation will be thin and the cartridge would not track the groove in a proper way.
Get what you need
But in order to get the warm sound served smoothly, and in particular, get good sound, you have to choose the right turntable. Here we have selected six that are very easy to use. They cost a bit more than the cheapest, but it’s because they have built-in turntable amplifier and USB port. That means you do not need any extra equipment to get the sound, just plug in a free input of the amplifier or the computer. For USB port, you can rip the discs to the laptop and transfer the music digitally to your mobile!
Place it in the right area:
A turntable is like a sensitive microphone and must stand horizontally on a solid surface. Otherwise, vibrations and resonances propagate into it, and it sounds like mullering in the speakers. Do not place it next to the speakers and avoid strong magnetic fields – and make sure the dust cover is open. If you still feel that it’s a murmur in the speakers, you’ll need a more stable surface. Then a good solution can be to mount a shelf on the wall and set the turntable to it.
Be sure to get one with the right features
A record player is really very simple. A rotating electric motor drives the disk drive at the right speed, and the vibrations created by the needle’s movements in the disc track generate power in the small pickup, which is then reproduced as music in the speakers. How good sound you get depends very much on how serious the construction is. A brushless engine, a subdued chassis, a precise suspension of the tine arm and a lavish pickup give a much better noise than a simpler and less expensive construction can achieve.
There is a reason why some turntables cost more than others. Quality costs money, you get the turntable amplifier included – plus a convenient USB output.
Use accessories with your turntable
The selection of accessories for your turntable is approximately equal to the selection of turntables – if not larger. There are very many little gadgets that can make your wine experience a lot better. Take for example the indispensable disk brush to prepare the way for the pickup needle to pick up the music and not dust from the disc track. If you want a good turntable, be sure to buy one from a reputable brand. One that has ultra-thin, carbon-resistant anti-static brush that solves the task in the finest ways.
If you really want your collection of vinyl records to be played well, a new and better turntable can make wonders. On the internet, you can have turntables in all price ranges, and a well-chosen quality pickup can often give you an audio enhancement that meets the requirements of you who have high expectations for the vinyl experience. This is of course if you read reviews about turntables before you buy one. So be sure to follow these tips and guidelines for buying and setting up a new turntable.